Auxiliary Power Connector Cable
Our Auxiliary Power Connector Cable makes it easy to connect the Doc Wattson or "Watt's Up" Watt meters to an optional power source like a battery pack, power supply, etc.
It also allows resetting the meter's accumulated measurements to zero*.
The auxiliary power cable plugs into the meter's auxiliary power connector socket. The other end has bare, tinned, leads.
12" long, 22 AWG, high-flexibility (60 strand), silicone insulated wire makes it easy to use. Connector has gold plated contacts. Wires are colored, brown, red, orange.
While not required (since the meter can get power from the measured circuit), it is very handy to have for many applications.
Connect red lead to plus voltage and brown lead to minus. See meter instructions and specifications for details and allowable voltages.
Orange lead (pin 3) connects to the Reset signal. Briefly connect it to 0 volts (minus lead) to reset the meter as described in the meter's documentation.
* On meters version 2.1 and above. (Check power on screen).